the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. adp a/3-2012 page 1 of 2 adp series special for lcd power supply wide input, non-isolated & regulated single positive or negative output multi-country patent protection rohs features product program input voltage(vdc) part number range nominal on/off function output voltage characteristic adp05c24 no negative voltage output non-adjustable adp05c24a yes negative voltage output adjustable adp0524a yes positive voltage output adjustable ADP0528A 5.0-12 5.0 yes positive voltage output adjustable on/off function: refer to recommended circuit. output specifications item part number test conditions min max units adp05c24 vin=5.0-12v, r l =2k refer to recommended circuit -25 -23 adp05c24a -25 -6.5* adp0524a 6 * 25 output voltage vout ADP0528A vin=5v, r adj =0-20k , on/off connect to gnd, refer to recommended circuit 6 * 30 v adp05c24 vin=5.0-12v, r l =2k,cout=100 f refer to recommended circuit 200 adp05c24a 200 adp0524a 200 ripple& noise ADP0528A vin=5-12vdc, r l =2k, r adj =0-20k on/off connect to gnd, cout=100 f refer to recommended circuit 450 mvp-p adp05c24 61 adp05c24a 60 adp0524a 61 efficiency ( ) ADP0528A vin=5v, r l =2k, r adj =0 , on/off connect to gnd, refer to recommended circuit 60 % note: *when vin change at 5.0-12v, adjustable ivouti (min) will change between 6-12v; common specification item test conditions min typ max units storage humidity 95 % storage temperature -40 125 operating temp. power derating (above 60 c) -20 71 temp. rise at full load 15 lead temperature 1.5mm from case for 10 seconds 300 o c cooling free air convection case material plastic (ul94-v0) mtbf 25 mil-hdbk-217f 1000 k hours weight 4.0 g l apply to lcd display l small footprint, thickness less than 7mm l wide input 5 to 12vdc l industry standard pinout l free air convection l no heat sink required l output voltage adjustable l remote on/off applications adp series are specially designed for lcd display, these produces have wide output voltage adjustable range, and function of remote on/off, free air convection, and no heat sink required while use. mornsun science & technology co.,ltd. address: no. 5, kehui st. 1, kehui development center, science ave., guangzhou science city, luogang district, guangzhou,p.r.china. tel: 86-20-38601850 fax:86-20-38601272 http://www.mornsun-power.com note: 1. all specifications measured at t a =25 c, humidity<75%, nominal input voltage and rated output load unless otherwise specified; 2.the nominal value is -24v, 24v or 28v.
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. adp a/3-2012 page 2 of 2 typical charecteristics operating temp.( ) c temperature derating graph 60 80 outline dimensions & footprint details mechanical dimmensions recommended footprint tube outline dimmensions note unitmminch general tolerances:inch : :[] 0.25 0.010 ] pinsectiontolerances mm inch mm :0.10[0.004] [ note: unitmminch generaltolerances :[] :0.50mm[0.020inch] lmminchdevicespertubequantitypcs lmminchpcs =530[20.866] : =220[8.661] 13 devicespertubequantity5 : shorttubeinnerpackagingdimensionsmm shorttubeouterpackagingdimensionswithsixinnerpackaging): mm longtubeinnerpackagingdimensionsmm mm mm :255*170*80 (( 375*280*270 :580*200*100 600*215*220 600*215*325 longtubeouterpackagingdimensions(with two inner packagin g ): longtubeouterpackagingdimensions(with three inner packagin g ): 6 . 9 5 [ 0 . 2 7 4 ] 37.90 [1.492] 27.94 [1.100] 1 . 5 0 [ 0 . 0 5 9 ] 9 . 5 0 [ 0 . 3 7 4 ] 4 . 1 0 [ 0 . 1 6 1 ] 0 . 5 0 [ 0 . 0 2 0 ] 0 . 3 0 [ 0 . 0 1 2 ] 0.50 [0.020] 1 .00 [0.039] 22.86 [0.900] 17.78 [0.700] 12.70 [0.500] 12345 9101112 12345 9101112 notegrid 2.54*2.54mm : . 9.60 [0.378] 1 2 . 4 0 [ 0 . 4 8 8 ] 1 6 . 9 0 [ 0 . 6 6 5 ] 4.90 [0.193] pin footprint details adp05c24 adp_a series 1 2 3 4 5 9 10 11 12 nc vin gnd nc nc nc nc nc vout nc vin gnd on/off adj nc nc nc vout discription no connection input common groud control output adjust output no connection no connection no connection (front view) (bottom view) recommended circuit lcd dc/dc converter vin:512vdc vout:xxxvdc cnyyww adp05xxxxa mornsun rl vin gnd vout cin cout rl vin gnd vout cin cout lcd dc/dc converter vin:512vdc vout:xxxvdc cnyyww adp05c24 mornsun w 20k note: 1. when use the convertor, filter capacitors should be connected to the input and output end, to reduce ripple and noise. 2. output voltage adjustor w is recommended to use 20k , when w =0 , ivouti=max; w =20k , ivouti=min. 3. on/off function: when switch close, natural output; when switch open, output shutdown. 4. adj pin is not allowed to open, or it may cause damage to the device.
|
